Classic AutoAir Perfect Fit-Elite Series Instrucciones de operaciones descargar pdf (Pagina 2)

CAUTION: ALL OF THE OUTSIDE VENTS MUST BE CLOSED WHEN THE

SYSTEM IS IN THE A/C MODE. THIS WILL ALLOW THE A/C SYSTEM TO

FUCTION AT ITS MAXIMUM PERFORMANCE LEVEL.

THE FOLLOWING SUMMARY WILL DESCRIBE EACH OF THE CONTROL

LEVERS FUNCTION.

FAN SPEED SWITCH: There are 3 speeds plus Off. When the switch is in the off

position it will disconnect the 12V power to the Blower Motor and the A/C Clutch. This

will shut down the entire system. When the switch is moved to any of the blower speeds

1,2 or 3 there is 12V supplied to the Micro-Switch which is mounted on the defrost air

housing.

FLOOR / FACE / DEFROST MODE: When the top lever is pulled all the way to

the LEFT, it will direct the air to the floor ducts. When the lever is moved into the

CENTER position the air is directed to the Dash Louvers. When the lever is pushed to the

far Right, the air will be directed onto the defrost outlets. When the lever is in the Defrost

position the A/C Compressor is activated and provides Dehumidification.

TEMPERATURE CONTROL: The temperature lever as shown is in the

COLDEST temperature position. As the lever is pushed to the right the temperature of

the discharged air will rise to the HOTTEST point.

Note: The temperature lever will function in any of the modes.

AIR CONDITIONING MODE: The picture shows the controls in the Floor Mode

(air-flow out the floor outlets).

When Air Conditioning is required the compressor clutch must be activated. This is

accomplished when the top lever is in the Center position. When the compressor is

activated the Temperature Lever will control the air from maximum cold through

maximum heat.

1 2 3 4 5 6 7 ... 26 27

Sin comentarios

Classic AutoAir Perfect Fit-Elite Series Instrucciones de operaciones Pagina 2